Configure Proxy Settings for a Scanning Node in Transparent Bridge Mode

To configure a scanning node in Transparent Bridge mode, configure proxy settings for it. These are the same as the proxy settings for a director node in this mode, except for the scanning role. For these settings, see Configure Proxy Settings for a Director Node in Transparent Bridge Mode.

The scanning role is configured by giving a node 0 as its priority value.

Configuring proxy settings for a scanning node is part of the procedure for configuring the Transparent Bridge mode. For on overview of the complete procedure, see Configure the Transparent Bridge Mode.

1. Select Configuration | Appliances.

2. On the appliance tree, select the appliance you want to configure as a scanning node and click Proxies.

3. Under Network Setup, select Transparent Bridge.
   
   The Transparent Bridge settings appear below the Network Setup settings.

4. Configure the same port redirects as for the director node.

5. Set Director priority to 0.

6. Configure IP spoofing in the same way as for the director node.

7. Configure the same HTTP, HTTPS, or FTP proxy ports as for the director node.

8. Click Save Changes.

To run more than one scanning node in Transparent Bridge mode, configure other appliances in the same way.