Skip to main content

Check out Interactive Visual Stories to gain hands-on experience with the SSE product features. Click here.

Skyhigh Security

Back Panel and Port Assignments

The WBG-4500-E appliance model has six network interfaces and an RMM interface on its back panel.

The network interfaces include four onboard interfaces and two on a network interface card that is preinstalled in a card slot on the upper right.


The network interfaces provide ports, which the operating system assigns names to as shown in the following table.

NOTE: Traffic can be routed with different speed rates through the ports on these interfaces. See the port column of the table.

Position Interface Name assigned to port on interface

For operating the Remote Management Module (RMM) with Baseboard Management Controller (BMC)
2 Network interface 1 eth2 (10,100, or 1000 Mbit/s)
3 Network interface 2 eth0 (10,100, or 1000 Mbit/s)
4 Network interface 3 eth3 (10,100, or 1000 Mbit/s)
5 Network interface 4 eth1 (10,100, or 1000 Mbit/s)
6 Network interface 5 eth5 (10,100, or 1000 Mbit/s)
7 Network interface 6 eth4 (10,100, or 1000 Mbit/s)


  • Was this article helpful?