Skip to main content

Check out Interactive Visual Stories to gain hands-on experience with the SSE product features. Click here.

Skyhigh Security

Additional Network Interface Cards

More network interfaces with ports can be added to the WBG-5000-F and WBG-5500-F appliance models by installing the following types of network interface cards (NICs):

  • Fiber network interface card with four network interfaces providing ports and short-range transceivers

  • Fiber network interface card with four network interfaces providing ports and long-range transceivers

  • Copper network interface card with two network interfaces providing ports

The cards can be installed in slots on the rear of an appliance. In the diagram here below, they are marked as A1 and A2:

clipboard_e81c1e5e8e930b91fc9fe414980d0b866.png

Installation options differ with regard to the two appliance models. The number of network interfaces and ports can be increased from four to eight on WBG-5000-F and from four to twelve on WBG-5500-F.

The following table provides more information about the network interface cards and where to install them.

For appliance model Network interface card type Network Interface Card Model Transceiver Ports Transceiver Model To be installed in slot SKU code
WBG-5000-F Fiber Supermicro's AOC-ATG-I4SM Short-range (SR) 4

AXIOM's AXG31444-MF

A1 (only one card can be installed at all) MAP-10G4SR-FBRF 
WBG-5000-F Fiber

Supermicro's AOC-ATG-I4SM

Long-range (LR) 4

AXIOM's AXG38153-MF

A1 (only one card can be installed at all) MAP-10G4LR-FBRF 
WBG-5000-F Copper1

Supermicro's AOC-ATGC-i2TM

n/a 2   A1 (only one card can be installed at all) MAP-10G2-CPRF
WBG-5500-F Fiber Supermicro's AOC-ATG-I4SM Short-range (SR) 4

AXIOM's AXG31444-MF

A1 or A2 or in both (one or two fiber cards can be installed) MAP-10G4SR-FBRF
WBG-5500-F Fiber

Supermicro's AOC-ATG-I4SM

Long-range (LR) 4

AXIOM's AXG38153-MF

A1 or A2 or in both (one or two fiber cards can be installed) MAP-10G4LR-FBRF
WBG-5500-F Copper1

Supermicro's AOC-ATGC-i2TM

n/a 2   A1 or A2 or in both (one or two copper cards can be installed) MAP-10G2-CPRF

NOTE

1The AOC ATGC i2TM copper card is only supported if the appliance software you are running is Secure Web Gateway 12.2.2
  or later.

  • Was this article helpful?