Port Assignments on WBG-5500-F

The WBG-5500-F appliance model ships with a copper network interface card (NIC) preinstalled that provides four ports. One or two network interface cards with more ports can additionally be installed.

The operating system assigns names to these ports, for example, eth0, eth1, or eth2, which are listed further below. The network interface cards that provide these ports are located as follows:

• The preinstalled copper card is located in the slot within the upper right corner on the rear of the appliance. This slot is marked as 1 in the illustration below.

• The additional network cards are installed in slot A1 or A2, or in both if two cards are installed.

The slots are also referred to as Riser 1, Riser A1, and Riser A2 in the following.

Different types of additional network cards can be installed. It can be fiber (SFP) cards with four ports each, or copper cards with two ports each, or a combination of both types.

For more information about these cards, including their SKU codes, see Additional Network Interface Cards.

The port assignments for the different configurations are as shown here below.

• Preinstalled copper card with four ports + additional fiber card with four ports in A1.
  
  Names and positions of these ports are as follows:
  
  
  
  When the additional fiber card is installed in A2, eth4, eth5, eth6, and eth7 are assigned as for A1.

• Preinstalled copper card with four ports + additional fiber card with four ports in A1 + additional fiber card with four ports in A2.
  
  Names and positions of these ports are as follows:
  
  

• Preinstalled copper card with four ports + additional copper card with two ports in A1 + additional copper card with two ports in A2.
  
  Names and positions of these ports are as follows:
  
  
   
• Preinstalled copper card with four ports + additional fiber card with four ports in A1 + additional copper card with two ports in A2.
  
  Names and positions of these ports are as follows:
  
  
   
• Preinstalled copper card with four ports + additional copper card with two ports in A1 + additional fiber card with four ports in A2.
  
  Names and positions of these ports are as follows: